2008/3/31

搞定文件

既然工程師拚了命開發,我也不能遜色:

* 3/30: 把「使用說明」搞定
* 3/31: 把「服務條款、隱私權政策」搞定

使用說明的頁面,我用了 jQuery 的程式碼,加上網友提供的 toggle(開閤)範例。雖然我花了半天在研究程式,但結果是令人滿意的。

服務條款、隱私權政策的內容,我則是花了整整一天的時間,參考各大網站的條款說明,依 wowTree 的服務性質,再去蕪存菁、融會貫通,所編寫出來的。

我並非一味的抄寫,或是敷衍了事,而是身為網站經營者的我,知道 wowTree 該承諾什麼(對網友的隱私保護)、無法承擔什麼(無法預期的狀況實在很多)。

如果能對自己負責,也才能對網友負責。

1 則留言:

  1. This implies that the pores and skin of the part is always formed by the plastic that is within the front of the soften pool within the molding barrel—that is, the plastic closest to the nozzle tip. If you visualize the soften pool divided into 10 sections as shown in Fig. best mens baseball hats 2, sections 1 to 7 are those that can type the pores and skin of the part. In a cold-runner mould, the plastic within the nozzle tip will find yourself because the pores and skin on the sprue. We leverage an offshore injection mould manufacturing facility with a decrease cost construction find a way to} supply decrease pricing than our purely domestic opponents. Maintaining the best temperatures within this {part of|a part of} the process is vital to ensuring the plastic could be injected efficiently and the ultimate part formed precisely.

    回覆刪除